Original UK City Oxygen Gas Sensor 4oxv 40xv O2 Cell Aay80-390 Aay80-390r 4oxv O2-A2 Oxygen Gas Detector

• Customization: Available
• Type: Electrochemical Gas Sensor
• Conductivity Type: Non-conductivity Type
• Model NO.: 40XV
• Output Signal Type: Analog Type
• Production Process: Integration
• Material: Metal
• IP Rating: IP65
• Sensitivity: High
• Certification: CE
• Customized: Non-Customized
• Output Signal: 0.1+-0.02mA in Air
• Maximum: 30%
• Customized Support: OEM, ODM, Obm
• Measurement Range: 0-25% Vol. O2
• Recommended Load Resistor: 100
• Casing Material: ABS
• Weight: 15g
• Operating Temperature Range: -20°c to +50°c
• Thermal Transient: <23.5% Vol. O2
• Relative Humidity Range: 5 to 95%Rh Non–condensing
• Expected Operating Life: Minimum 24 Months in Air
• Storage Life: 6 Months in Original Packaging
• Transport Package: Cartons
• Trademark: CITY
• Origin: United Kindom
• HS Code: 9027100090
• Package Size: 20.00cm * 15.00cm * 10.00cm
• Package Gross Weight: 0.500kg

Product Description

Product Description

Typical Applications

General purpose, portable or fixed life safety.

Performance Data

For full details of the 4OXV's performance, please refer to the sensor Characterisation Note, available from a

member of our Technical Sales team.

Poisons

CiTiceLs are designed for operation in a wide range of environments and harsh conditions. However it is

important that exposure to high concentrations of solvent vapours is avoided, both during storage, fitting into

instruments, and operation. When using sensors with printed circuit boards (PCBs), degreasing agents should

be used before the sensor is fitted. Do not glue directly on or near the CiTiceL as the solvent may cause crazing

of the plastic.

Cross Sensitivity Data

Toxic gases at TLV levels will have no cross-sensitivity effect on Oxygen CiTiceLs. At very high levels

(i.e. percent levels), highly oxidising gases (e.g. ozone, chlorine) will interfere to the extent of their oxygen

equivalent, but most other commonly occurring gases will have no effect.

Acid Gases

IMPORTANT NOTE: Acid gases such as CO2 and SO2 will be absorbed by the electrolyte and tend to increase

the flux of oxygen to the electrode. This gives an enhanced oxygen signal of approximately 0.3% output per 1%

CO2 . Oxygen CiTiceLs are not suitable for continuous operation in concentrations of CO2 above 25%.

 

 

Company Information

Packaging & Shipping

 

FAQ